ALXI-III Washing Drying Filling Sealing Syrup Oral Eye Drop Ampoule
and Vial Filling Line for 2 ML
1.QCL 100 Vertical Ultrasonic Washing Machine
1.1 Brief Introduction
This machine uses vertical drum structure. Transport mesh belt feed
the bottle with screw. Clip the bottle, and turn it around by
mechanical arm in continuous rotation. Washing spray pipe does
swing and track movement repeatedly. Spray water and air
alternately when the bottle is in upside down, and use ultrasonic
washing. It has excellent washing effect. Machine is made up by
bedplate, drum, screw lifter, transmission gear, water pump, filter
and etc. After water injection, bottles move to water channel for
1-minute ultrasonic washing. Then screw sends bottles to lift
wheel. Mechanical arm to clip them and turn 180 degrees to upside
down. Wash them by water and air alternately.
All the cleaning fluid contacted parts use SS304 and non-toxic
corrosion-resistant material. All working area use PC glasses.
Prevent from the outside pollution. Machine has the ultimate
filter. It makes cleaning water and compressed air reach the
cleaning washing requirement.
This machine uses AC motor drive, frequency speed control and PLC
control circuit. It has reliable performance. Water in tank has
automatic constant temperature control with water level control
switch. It prevents the machine from pump, ultrasonic and heater
turning on in waterless condition. Pipeline has pressure display.
Adjust the pressure by diaphragm valve. This machine can receive
the signal from sterilization oven, filling and sealing machine.
When bottle is in jam, machine will turn off automatically.
1.2 Specification
Bottle Size: 2 ml Ampoule
Capability: 6000 bottles/hr (2ml)
Bottle Washing Quality Rate: >99%
Bottle Break Rate: <0.3%
Water Consumption: 0.4-0.6 m3/h in 0.2-0.3 mpa
Gas Consumption: 40-50 m3/h in 0.25-0.35 mpa
Outside Dimension: 2099*2036*1350 mm
Machine Weight: 2,500 kg
Power Supply: 380 V/ 50 Hz
Power Consumer: 17.6 kw
2.ASMR620-48 Tunnel Hot Air Circulation Oven
2.1Brief Introduction
This machine is mainly used in pharmaceutical industry for drying
sterilization for ampoule, vial and oral bottles.
This machine automatically feed, pre-heat, drying sterilize, cool
and outcome the bottles. It uses laminar flow and hot-air fast
sterilization. It makes bottles arrive National Clean Class 3
(American Industry Class 100) in the tunnel. It is the most
fashionable and effective drying sterilization equipment. The heat
distributes equally, and it has good effect on the heat removing.
This machine can be used separately, and it can also be used with
bottle washing machine and filling machine in the production line.
2.2 Specification
| Bottle Size | 1-10ml Ampoule |
| Conveyor Belt Width | 620mm |
| Sterilization Temperature | 320±10℃ Adjustable |
| FH | ＞1365 |
| Sterilization Time | ≥5min |
| Temperature Sensor Accuracy | ≤±2℃ |
| Empty Sterilization Temperature Range | ≤±5℃ |
| Full Sterilization Temperature Range | ≤±7.5℃ |
| Temperature at bottle out port | ≤40j℃ |
| Exhaust Air | 3500-4100 m3/h |
| Electric Capacity | 51kw (Electric Heater43kw) |
| Dimension | 4388×1465×2445mm |
| Net Weight | 3000Kg |
3.AGF8 Filling and Sealing Machine
This machine is used for automatic ampoule filling and sealing in
pharmaceutical industry.
AGF ampoule vertical filling and sealing machine can be used for
bottle feeding, Nitrogen pre-filling, bottle filling, Nitrogen
after-filling, pre-heat and draw bench sealing. It uses advanced
intelligent electronic control technology, nice-looking
human-computer interface. It can perfectly connect advanced
pharmaceutical production and sterile production, and meet GMP
requirement.
This can be used independently, and it can also be used with
washing machine, tunnel oven and etc, so as to make the automatic
production.
3.1Specification
| Size | Ampoule 2ml |
Actual Capacity (bottles/hr) | 2ml: 6,000 |
| Bottle Break Rate | ≤0.05% |
| Filling Accuracy | Ceramic Pump(≤±1.5%) |
| Sealing Qualified Rate | ≥99.9% |
| Sealing Gas | Coal Gas + Oxygen, Natural Gas |
| Gas fuel consumption and pressure | 1.5-2.5 m3 /h , 0.2-0.3Mpa |
| Oxygen consumption and pressure | 1.2-1.5 m3/h. ,0.2-0.3Mpa |
| Power | 2.2kw |
| Dimension | AGF8:3791×1741×2380mm |
| Weight | 2,500KG |
| Power Supply | 380V 50HZ |
